TLV2632IDR

2 Channels 28mA per Channel 1pA 77 dB Instrumentational OP Amps 2.75V 2.7V~5.5V ±1.35V~2.75V TLV2632 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2632IDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 559
Description: 2 Channels 28mA per Channel 1pA 77 dB Instrumentational OP Amps 2.75V 2.7V~5.5V ±1.35V~2.75V TLV2632 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TLV2632
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	2.75V
Number of Channels	2
Operating Supply Current	730μA
Nominal Supply Current	2mA
Output Current	28mA
Slew Rate	10V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	77 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.75V
Output Current per Channel	28mA
Input Offset Voltage (Vos)	250μV
Bandwidth	9MHz
Unity Gain BW-Nom	9000 kHz
Voltage Gain	100dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Nominal Gain Bandwidth Product	9MHz
Max I/O Voltage	3.5mV
Power	NO
Input Offset Current-Max (IIO)	0.00005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2632IDR Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. A Cut Tape (CT) case is used for delivering the op amp. There have been a total of 8 terminations over the past year. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 8 pins. Op amp ic rates 250μV for input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . You can run this op amp ic on 730μA . 100dB should be the voltage gain. 2 channels are available on the instrumentation amplifier. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. It is used TR to pack the op amps.