TLV2702IDGKR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Amplifier, Comparator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Security Systems |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV2702 |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 1.9μA |
| Max Supply Current | 1.9μA |
| Response Time | 36 μs |
| Slew Rate | 2500 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 73 dB |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 5mV |
| Unity Gain BW-Nom | 5.5 kHz |
| Average Bias Current-Max (IIB) | 0.0017μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Input Bias Current | 500pA |
| Voltage Gain-Min | 30000 |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLV2702IDGKR Overview
In order to house this device, it is enclosed in a Tape & Reel (TR)-package which is integrated with the device.In my opinion, this is an excellent Amplifier, Comparator that represents excellent value for money.A package with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) was dispatched.The part is mounted in the Surface Mount.Security Systems mainly uses it.Device TLV2702 is the base part number.For the purposes of amplification, 2 functions are used here to access high performance.8 terminals are present in total, each with its own set of functions that can be carried out.To achieve peak relow for the part, the iron temperature should be controlled by 260.8 pins make up the total number of pins on the part.In order for this amplifier to operate properly, I would recommend a supply voltage of 2.7V.The amplifier has 8-pins for custom applications.A device can operate at a temperature as low as -40°C, which is the lowest temperature at which it can operate.There is an impressive capability for this part to operate at temperatures as high as 125°C.In order to enhance design flexibility, Surface Mount has been incorporated into this product.Having a superb amplifying capacity, this Operational Amplifier does, just like any other high-quality Operational Amplifier will be able to do.As far as supply voltage is concerned, it is rated at 16V maximum.Powered by at least 2.5V watts when supplied.2 channels are combined to achieve amazing performance in this video processing device.
TLV2702IDGKR Features
TLV2702IDGKR Applications
There are a lot of Texas Instruments TLV2702IDGKR Special Purpose Amplifiers applications.
- single/dual op amp sum and difference circuits
- Hand-held batteries
- Instrumentation
- MP3
- Comparator
- Industrial applications including automation
- Signal operation
- Voltage regulation circuit
- Power control
- Communication device
