TLV2711IDBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TLV2711 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 13μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 150mW |
| Output Current | 50mA |
| Slew Rate | 0.025V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 65 kHz |
| Unity Gain BW-Nom | 65 kHz |
| Voltage Gain | 118.06dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 450μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 3mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2711IDBVTG4 Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. A General Purpose-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 5 terminations over the past year. The total number of pins on linear amplifier is 5. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 5 pins are present on the instrumentation amplifier. Op amp ic rates 3mV for input offset voltage. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 13μA . Keeping the voltage gain at 118.06dB is the best course of action. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. As a result of this, the buffer amplifier is packed in TR. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLV2711IDBVTG4 Features
5 Pins
supply voltage of 3V
118.06dB voltage gain
Output Type: Rail-to-Rail
TLV2711IDBVTG4 Applications
There are a lot of Texas Instruments TLV2711IDBVTG4 Instrumentational OP Amps applications.
- Vehicle electronics
- Test and measurement instruments
- Multimedia playback equipment
- Commercial audio systems
- Television broadcasting equipment
- Digital cameras
- Portable media players
- Thermocouples
- Signal amplification
- Tablets
