TLV272IDGK

13mA per Channel 1pA 58 dB Instrumentational OP Amps 0.00006μA 5V 2.7V~16V ±1.35V~8V TLV272 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV272IDGK
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 234
Description: 13mA per Channel 1pA 58 dB Instrumentational OP Amps 0.00006μA 5V 2.7V~16V ±1.35V~8V TLV272 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	TLV272
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Elements	2
Operating Supply Current	625μA
Nominal Supply Current	1.6mA
Power Dissipation	250mW
Output Current	13mA
Slew Rate	2.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	CMOS
Common Mode Rejection Ratio	58 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~16V ±1.35V~8V
Output Current per Channel	13mA
Input Offset Voltage (Vos)	5mV
Bandwidth	3MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	3000 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.00006μA
Power Supply Rejection Ratio (PSRR)	70dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	500μV
Current - Output / Channel	8mA
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	2.4MHz
Max I/O Voltage	5mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV272IDGK Overview

In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. Buffer amps of this type are called CMOS-types. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 5mV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 625μA . It is a member of the 110dB's 110dB family. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V.