TLV272QDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV272 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Circuits | 2 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 660μA |
| Output Current | 13mA |
| Slew Rate | 2.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 13mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Current - Output / Channel | 8mA |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV272QDRG4Q1 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 2.7V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 500μV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Using a supply current of 750μA , this buffer op amp will be able to operate. Keeping the voltage gain at 110dB is the best course of action. The buffer amp consists of 2 circuits in total. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 8V. For packing the buffer amplifier, the TR-axis is adopted. Buffer op amp series numbers are indicated by the Automotive, AEC-Q100.
TLV272QDRG4Q1 Features
8 Pins
supply voltage of 2.7V
110dB voltage gain
Output Type: Rail-to-Rail
TLV272QDRG4Q1 Applications
There are a lot of Texas Instruments TLV272QDRG4Q1 Instrumentational OP Amps applications.
- Video data acquisition
- Semiconductor detectors
- Medical imaging
- Large motor controllers
- Digital cameras
- Instrumentation
- High input resistance broadband
- Strain gauges
- Weak signal detection
- Professional videography
