banner_page

TLV274ID

4 Channels 13mA per Channel 1pA 69 dB Instrumentational OP Amps 0.00006μA 5V 2.7V~16V ±1.35V~8V TLV274 14 Pins 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV274ID
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 638
  • Description: 4 Channels 13mA per Channel 1pA 69 dB Instrumentational OP Amps 0.00006μA 5V 2.7V~16V ±1.35V~8V TLV274 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Base Part Number TLV274
Pin Count 14
Output Type Rail-to-Rail
Operating Supply Voltage 5V
Power Supplies +-1.35/+-8/2.7/16V
Number of Channels 4
Operating Supply Current 625μA
Nominal Supply Current 3.2mA
Power Dissipation 531mW
Output Current 13mA
Slew Rate 2.6V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 69 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 2.7V~16V ±1.35V~8V
Output Current per Channel 13mA
Input Offset Voltage (Vos) 5mV
Bandwidth 3MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 3000 kHz
Voltage Gain 110dB
Average Bias Current-Max (IIB) 0.00006μA
Power Supply Rejection Ratio (PSRR) 70dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 500μV
Current - Output / Channel 8mA
Low-Bias YES
Micropower NO
Bias Current-Max (IIB) @25C 0.00006μA
Programmable Power NO
Dual Supply Voltage 5V
Nominal Gain Bandwidth Product 3MHz
Max I/O Voltage 5mV
Input Offset Current-Max (IIO) 0.00006μA
Height 1.75mm
Length 8.65mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV274ID Overview


There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. There have been a total of 14 terminations over the past year. Buffer amplifier has a total of 14 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 14 pins are located on the operational amplifiers. Op amp rates 5mV as input offset voltage. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . You can run this op amp ic on 625μA . There should be no change in the voltage gain at 110dB. As far as the device is concerned, buffer amplifier has 4 channels. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage.

TLV274ID Features


14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail

TLV274ID Applications


There are a lot of Texas Instruments TLV274ID Instrumentational OP Amps applications.

  • PDA
  • Industrial applications including automation
  • Power transmission
  • Gaming industry
  • Portable electronic products powered by batteries
  • High speed sample
  • Power control
  • Band-stop filter
  • Non-polarized electrodes
  • Automation control systems

Write a review

Note: HTML is not translated!
    Bad           Good