TLV274IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLV274 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Power Supplies | +-1.35/+-8/2.7/16V |
| Number of Channels | 4 |
| Operating Supply Current | 625μA |
| Nominal Supply Current | 3.2mA |
| Power Dissipation | 833mW |
| Output Current | 13mA |
| Slew Rate | 2.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 69 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 13mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Current - Output / Channel | 8mA |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 5mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV274IN Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. An op amp ic of the General Purpose type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 14 terminations. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are included on the operational amplifiers. There is an input offset voltage of 5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Operational amplifier can operate supply current at 625μA. The voltage gain should stay at 110dB. Buffer op amp is equipped with 4 channels on the device. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V.
TLV274IN Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
TLV274IN Applications
There are a lot of Texas Instruments TLV274IN Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- PDA
- High-frequency data acquisition systems
- Active probe
- Medical imaging
- Portable electronic products powered by batteries
- Blood pressure sensors
- Measurements of Wheatstone bridge
- Test equipment
- Power transmission
