TLV274QDRG4Q1

13mA per Channel 1pA 58 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV274 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV274QDRG4Q1
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 678
Description: 13mA per Channel 1pA 58 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV274 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.7V
Terminal Pitch	1.27mm
Base Part Number	TLV274
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Power Supplies	+-1.35/+-8/2.7/16V
Number of Circuits	4
Operating Supply Current	750μA
Nominal Supply Current	660μA
Output Current	13mA
Slew Rate	2.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	58 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~16V ±1.35V~8V
Output Current per Channel	13mA
Input Offset Voltage (Vos)	500μV
Bandwidth	3MHz
Unity Gain BW-Nom	3000 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.00006μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16.5V
Current - Output / Channel	8mA
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	3MHz
Max I/O Voltage	5mV
Power	NO
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV274QDRG4Q1 Overview

There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 14. A total of 14 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 14 pins on this chip. In terms of input offset voltage, operational amplifier rates 500μV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 750μA and 10 . The voltage gain should stay at 110dB. This op amp contains 4 circuits. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 8V. TR is adopted to pack the instrumentation amplifier. Instrumentation amplifiers are numbered by their Automotive, AEC-Q100 series.