TLV274QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV274 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Power Supplies | +-1.35/+-8/2.7/16V |
| Number of Circuits | 4 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 3.6mA |
| Output Current | 13mA |
| Slew Rate | 2.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 13mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Current - Output / Channel | 8mA |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV274QDRQ1 Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 2.7V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 14 pins. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAn 750μA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 110dB. The buffer amp consists of 4 circuits in total. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage. It is used TR to pack the op amps. Instrumentation amplifiers are numbered by their Automotive, AEC-Q100 series.
TLV274QDRQ1 Features
14 Pins
supply voltage of 2.7V
110dB voltage gain
Output Type: Rail-to-Rail
TLV274QDRQ1 Applications
There are a lot of Texas Instruments TLV274QDRQ1 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Information processing
- Micro signal measurement
- Wireless base stations
- Home audio systems
- RF cable systems
- Medical instruments
- Signal amplification
- Oscilloscopes
- Precision measurement
