TLV2762IDG4
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~3.6V ±0.9V~1.8V |
| Output Current per Channel | 10.2mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 500 kHz |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 101.58dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 4V |
| Voltage - Input Offset | 550μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000015μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 500 kHz |
| Max I/O Voltage | 3.5mV |
| Input Offset Current-Max (IIO) | 0.000015μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.4V |
| Base Part Number | TLV2762 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 56μA |
| Power Dissipation | 710mW |
| Output Current | 10.2mA |
| Slew Rate | 0.23V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
TLV2762IDG4 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 2.4V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 3.5mV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureOperational amplifier can operate supply current at 20μA. 101.58dB should remain the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. Op amp has total of 2 elements.
TLV2762IDG4 Features
8 Pins
supply voltage of 2.4V
101.58dB voltage gain
Output Type: Rail-to-Rail
TLV2762IDG4 Applications
There are a lot of Texas Instruments TLV2762IDG4 Instrumentational OP Amps applications.
- Information processing
- Switching amplifier
- Professional videography
- Strain gauges
- Measurements of Wheatstone bridge
- Active probe
- Broadcasting
- Test equipment
- Home audio systems
- earphone
