TLV2763IDGS

10.2mA per Channel 3pA 50 dB Instrumentational OP Amps 1.8V~3.6V ±0.9V~1.8V TLV2763 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2763IDGS
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 129
Description: 10.2mA per Channel 3pA 50 dB Instrumentational OP Amps 1.8V~3.6V ±0.9V~1.8V TLV2763 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.4V
Terminal Pitch	0.5mm
Base Part Number	TLV2763
Pin Count	10
Output Type	Rail-to-Rail
Number of Elements	2
Power Supplies	+-0.9/+-1.8/1.8/3.6V
Operating Supply Current	20μA
Nominal Supply Current	56μA
Power Dissipation	485mW
Output Current	10.2mA
Slew Rate	0.23V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	3pA
Voltage - Supply, Single/Dual (±)	1.8V~3.6V ±0.9V~1.8V
Output Current per Channel	10.2mA
Input Offset Voltage (Vos)	3.5mV
Bandwidth	500 kHz
Unity Gain BW-Nom	500 kHz
Voltage Gain	101.58dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	4V
Voltage - Input Offset	550μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.000015μA
Programmable Power	NO
Nominal Gain Bandwidth Product	500 kHz
Max I/O Voltage	3.5mV
Input Offset Current-Max (IIO)	0.000015μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	1.02mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2763IDGS Overview

Packaging for the buffer amplifier is in the form of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 10 terminations. The pins on this board total to 10 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.4V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 10-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 3.5mV. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 20μA, this op amp ic can operate. Maintain 101.58dB as the voltage gain. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. For the operating supply voltage of the op amp ic, there is a rating of 2.