TLV2764IN

10.2mA per Channel 3pA 50 dB Instrumentational OP Amps 0.0002μA 1.8V~3.6V ±0.9V~1.8V TLV2764 14 Pins 14-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2764IN
Package: 14-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 141
Description: 10.2mA per Channel 3pA 50 dB Instrumentational OP Amps 0.0002μA 1.8V~3.6V ±0.9V~1.8V TLV2764 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	14
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	4
Supply Voltage	2.4V
Base Part Number	TLV2764
Pin Count	14
Output Type	Rail-to-Rail
Number of Elements	4
Power Supplies	+-0.9/+-1.8/1.8/3.6V
Operating Supply Current	20μA
Nominal Supply Current	112μA
Power Dissipation	1.6W
Output Current	10.2mA
Slew Rate	0.23V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	3pA
Voltage - Supply, Single/Dual (±)	1.8V~3.6V ±0.9V~1.8V
Output Current per Channel	10.2mA
Input Offset Voltage (Vos)	3.5mV
Bandwidth	500 kHz
Unity Gain BW-Nom	500 kHz
Voltage Gain	101.58dB
Average Bias Current-Max (IIB)	0.0002μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	4V
Voltage - Input Offset	550μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.000015μA
Programmable Power	NO
Nominal Gain Bandwidth Product	500 kHz
Max I/O Voltage	3.5mV
Input Offset Current-Max (IIO)	0.000015μA
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2764IN Overview

There is a 14-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 14. A total of 14 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 2.4V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 14 pins. There is an input offset voltage of 3.5mV for this buffer op amp. Through Hole is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 20μA . Voltage gain should remain at 101.58dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. As a whole, there are 4 elements that make up this buffer amplifier.