Parameters |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.4V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLV2765 |
Pin Count |
16 |
Output Type |
Rail-to-Rail |
Number of Elements |
4 |
Power Supplies |
+-0.9/+-1.8/1.8/3.6V |
Operating Supply Current |
20μA |
Nominal Supply Current |
112μA |
Power Dissipation |
1.09W |
Output Current |
10.2mA |
Slew Rate |
0.23V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
50 dB |
Current - Input Bias |
3pA |
Voltage - Supply, Single/Dual (±) |
1.8V~3.6V ±0.9V~1.8V |
Output Current per Channel |
10.2mA |
Input Offset Voltage (Vos) |
3.5mV |
Bandwidth |
500 kHz |
Unity Gain BW-Nom |
500 kHz |
Voltage Gain |
101.58dB |
Average Bias Current-Max (IIB) |
0.0001μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
4V |
Voltage - Input Offset |
550μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.000015μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
500 kHz |
Max I/O Voltage |
3.5mV |
Input Offset Current-Max (IIO) |
0.000015μA |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
TLV2765CDR Overview
Op amp is packaged in 16-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 16 mark. A total of 16 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 2.4V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 16 pins. With regard to input offset voltage, instrumentation amplifier is rated at 3.5mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges 0°C~70°C. An 20μA volt supply current is needed for this linear amplifier to operate. 101.58dB should be the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4. It is used TR to pack the op amps.
TLV2765CDR Features
16 Pins
supply voltage of 2.4V
101.58dB voltage gain
Output Type: Rail-to-Rail
TLV2765CDR Applications
There are a lot of Texas Instruments TLV2765CDR Instrumentational OP Amps applications.
- Semiconductor detectors
- Multiplication circuits
- Inverse/same-phase proportional circuit
- Precision measurement
- Television
- Voltage regulation circuit
- Tablets
- Subtraction operation circuits
- High gain DC amplifier
- Active probe