TLV2771CDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV2771 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 2mA |
| Power Dissipation | 437mW |
| Output Current | 50mA |
| Slew Rate | 10.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 5.1MHz |
| Unity Gain BW-Nom | 5100 kHz |
| Voltage Gain | 113.06dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 4.8MHz |
| Max I/O Voltage | 2.5mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2771CDBVT Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. We are approaching the 5h termination of the year. It consists of a total of 5 pins in total. Please take in mind that op amp should be run at 2.7V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 5 pins. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at 0°C~70°C. An 1mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 113.06dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 1. The operating supply voltage of the buffer op amp is rated at 3V. To pack the operational amplifier ics, TR is adopted as the packing method.
TLV2771CDBVT Features
5 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail
TLV2771CDBVT Applications
There are a lot of Texas Instruments TLV2771CDBVT Instrumentational OP Amps applications.
- Video amplifiers
- Voltage regulation circuit
- Scintillation detectors
- Micro signal measurement
- Automation control systems
- Tablets
- Weighing systems
- Addition operation circuits
- Signal amplification
- earphone
