TLV2772AQDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV2772 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Circuits | 2 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 2mA |
| Output Current | 50mA |
| Slew Rate | 10.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 360μV |
| Bandwidth | 5.1MHz |
| Unity Gain BW-Nom | 5100 kHz |
| Voltage Gain | 113.06dB |
| Average Bias Current-Max (IIB) | 0.00035μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Max I/O Voltage | 1.6mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2772AQDRG4Q1 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 360μV. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 1mA . Maintain 113.06dB as the voltage gain. The buffer amp consists of 2 circuits in total. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V. TR is adopted to pack the instrumentation amplifier. The Automotive, AEC-Q100 represents the op amp's series number.
TLV2772AQDRG4Q1 Features
8 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail
TLV2772AQDRG4Q1 Applications
There are a lot of Texas Instruments TLV2772AQDRG4Q1 Instrumentational OP Amps applications.
- Strain gauges
- Video data acquisition
- Comparator
- High gain DC amplifier
- Proportional operation circuits
- Image computer boards
- Automotive sensors
- Measurements of Wheatstone bridge
- Navigation
- Non-polarized electrodes
