TLV2772AQPW

50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.00035μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2772AQPW
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 158
Description: 50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.00035μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Base Part Number	TLV2772
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Circuits	2
Operating Supply Current	1mA
Nominal Supply Current	4mA
Output Current	50mA
Slew Rate	10.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	2.5V~5.5V ±1.25V~2.75V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	360μV
Bandwidth	5.1MHz
Unity Gain BW-Nom	5100 kHz
Voltage Gain	113.06dB
Average Bias Current-Max (IIB)	0.00035μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	4.8MHz
Max I/O Voltage	1.6mV
Power	NO
Input Offset Current-Max (IIO)	0.00006μA
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2772AQPW Overview

Packaging for the buffer amplifier is in the form of a 8-TSSOP (0.173, 4.40mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 8 terminations have been reported in the past few weeks. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 360μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using a supply current of 1mA , this buffer op amp will be able to operate. Keeping the voltage gain at 113.06dB is the best course of action. There are 2 circuits on op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 3V. A TR-shaped amplifier is used to pack the buffer amps.