TLV2772CDGKR

50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.0001μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2772CDGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 777
Description: 50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.0001μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Base Part Number	TLV2772
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	1mA
Nominal Supply Current	4mA
Power Dissipation	424mW
Output Current	50mA
Slew Rate	10.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	2.5V~5.5V ±1.25V~2.75V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	2.5mV
Bandwidth	5.1MHz
Unity Gain BW-Nom	5100 kHz
Voltage Gain	113.06dB
Average Bias Current-Max (IIB)	0.0001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	4.8MHz
Max I/O Voltage	2.5mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes

TLV2772CDGKR Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 8 pins on it. There is an input offset voltage of 2.5mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . Operational amplifier can operate supply current at 1mA. It is recommended to keep the voltage gain at 113.06dB at all times. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 3V voltage. It is used TR to pack the op amps.