TLV2772CDR

50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.0001μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2772CDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 819
Description: 50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.0001μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Base Part Number	TLV2772
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	1mA
Nominal Supply Current	4mA
Power Dissipation	725mW
Output Current	50mA
Slew Rate	10.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	2.5V~5.5V ±1.25V~2.75V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	2.5mV
Bandwidth	5.1MHz
Unity Gain BW-Nom	5100 kHz
Voltage Gain	113.06dB
Average Bias Current-Max (IIB)	0.0001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	4.8MHz
Max I/O Voltage	2.5mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR

TLV2772CDR Overview

There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. As long as the supply current of the chip does not exceed 1mA, this op amp ic can operate. Op amp is a member of the 113.06dB's 113.06dB family. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of the buffer op amp is rated at 3V. TR is adopted to pack the instrumentation amplifier.