TLV2772IDGKR

50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.00035μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2772IDGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 375
Description: 50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.00035μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Base Part Number	TLV2772
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	1mA
Nominal Supply Current	4mA
Power Dissipation	424mW
Output Current	50mA
Slew Rate	10.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	2.5V~5.5V ±1.25V~2.75V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	2.5mV
Bandwidth	5.1MHz
Unity Gain BW-Nom	5100 kHz
Voltage Gain	113.06dB
Average Bias Current-Max (IIB)	0.00035μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	4.8MHz
Max I/O Voltage	2.5mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2772IDGKR Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 2.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. You can run this op amp ic on 1mA . You should keep the voltage gain at 113.06dB for the time being. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 3V. For packing the buffer amplifier, the TR-axis is adopted.