TLV2772IDR

50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.00035μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2772IDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 974
Description: 50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.00035μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Max Power Dissipation	725mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Base Part Number	TLV2772
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	1mA
Nominal Supply Current	4mA
Power Dissipation	725mW
Output Current	50mA
Slew Rate	10.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	2.5V~5.5V ±1.25V~2.75V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	2.5mV
Bandwidth	5.1MHz
Unity Gain BW-Nom	5100 kHz
Voltage Gain	113.06dB
Average Bias Current-Max (IIB)	0.00035μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	4.8MHz
Max I/O Voltage	2.5mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2772IDR Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. The linear amplifier should be run at 2.7V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 2.5mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using a supply current of 1mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 113.06dB at all times. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are a total of 2 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 3V voltage. This linear amplifier pack is based on the TR axis.