TLV2773AIN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV2773 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Circuits | 2 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 4mA |
| Output Current | 50mA |
| Slew Rate | 10.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 700μV |
| Bandwidth | 5.1MHz |
| Unity Gain BW-Nom | 4800 kHz |
| Voltage Gain | 113.06dB |
| Average Bias Current-Max (IIB) | 0.00035μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 5.1MHz |
| Max I/O Voltage | 2.1mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2773AIN Overview
Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 14. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 2.7V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 14 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 700μV. Through Hole is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . A supply current of 1mA can be used to operate this linear amplifier. 113.06dB should remain the voltage gain. There are 2 circuits on this op amp. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage.
TLV2773AIN Features
14 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail
TLV2773AIN Applications
There are a lot of Texas Instruments TLV2773AIN Instrumentational OP Amps applications.
- High gain DC amplifier
- Medical imaging
- Precision measurement
- Proportional counter tubes
- Test and measurement instruments
- Power generator
- Image computer boards
- Communication
- Signal amplification
- Industrial control system
