TLV2775IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV2775 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | 2.7/5V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 700mW |
| Output Current | 50mA |
| Slew Rate | 10.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 5.1MHz |
| Unity Gain BW-Nom | 5100 kHz |
| Voltage Gain | 113.06dB |
| Average Bias Current-Max (IIB) | 0.00035μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 700μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 4.8MHz |
| Max I/O Voltage | 2.7mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2775IPWR Overview
Op amp is packaged in 16-TSSOP (0.173, 4.40mm Width) case. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 16 terminations this year. Buffer amplifier has a total of 16 pins on it. Please take in mind that op amp should be run at 2.7V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 16 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 2.5mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. Using an 1mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 113.06dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. As a whole, there are 4 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TR.
TLV2775IPWR Features
16 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail
TLV2775IPWR Applications
There are a lot of Texas Instruments TLV2775IPWR Instrumentational OP Amps applications.
- Medical instruments
- Portable electronic products powered by batteries
- Fission chambers
- Subtraction operation circuits
- Car stereo
- Video computer boards
- Fast A/D and D/A converters
- Displayers for aircraft and air transportation control systems
- Weighing systems
- Micro signal measurement
