TLV2781IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV2781 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 650μA |
| Nominal Supply Current | 770μA |
| Power Dissipation | 710mW |
| Output Current | 23mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 2.5pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~3.6V ±0.9V~1.8V |
| Output Current per Channel | 23mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 8MHz |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 4V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 8MHz |
| Max I/O Voltage | 3mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2781IDR Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 3mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureUsing an 650μA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 120dB. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. There are 1 elements in total in this linear amplifier. It is used TR to pack the op amps.
TLV2781IDR Features
8 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2781IDR Applications
There are a lot of Texas Instruments TLV2781IDR Instrumentational OP Amps applications.
- Portable media players
- Television
- Industrial applications including automation
- Subtraction operation circuits
- Hand-held batteries
- Fission chambers
- High/low-pass filter circuit
- Broadcasting
- Signal operation
- Video computer boards
