banner_page

TLV2782AID

23mA per Channel 2.5pA 50 dB Instrumentational OP Amps 0.0003μA 1.8V~3.6V ±0.9V~1.8V TLV2782 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV2782AID
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 246
  • Description: 23mA per Channel 2.5pA 50 dB Instrumentational OP Amps 0.0003μA 1.8V~3.6V ±0.9V~1.8V TLV2782 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 2.7V
Base Part Number TLV2782
Pin Count 8
Output Type Rail-to-Rail
Number of Elements 2
Operating Supply Current 650μA
Nominal Supply Current 1.54mA
Power Dissipation 710mW
Output Current 23mA
Slew Rate 5V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 50 dB
Current - Input Bias 2.5pA
Voltage - Supply, Single/Dual (±) 1.8V~3.6V ±0.9V~1.8V
Output Current per Channel 23mA
Input Offset Voltage (Vos) 2mV
Bandwidth 8MHz
Unity Gain BW-Nom 8000 kHz
Voltage Gain 120dB
Average Bias Current-Max (IIB) 0.0003μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 4V
Voltage - Input Offset 250μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.000015μA
Programmable Power NO
Nominal Gain Bandwidth Product 8MHz
Max I/O Voltage 2mV
Input Offset Current-Max (IIO) 0.000015μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV2782AID Overview


There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 8. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . This op amp can operate from a supply current at 650μA. Maintain 120dB as the voltage gain. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 2.

TLV2782AID Features


8 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail

TLV2782AID Applications


There are a lot of Texas Instruments TLV2782AID Instrumentational OP Amps applications.

  • Mobile phone
  • Portable electronic products powered by batteries
  • Strain gauges
  • Semiconductor detectors
  • Medical instruments
  • Navigation
  • Multimedia playback equipment
  • Digital cameras
  • Signal amplification
  • Instrumentation

Write a review

Note: HTML is not translated!
    Bad           Good