banner_page

TLV2782CDGKRG4

23mA per Channel 2.5pA 50 dB Instrumentational OP Amps 0.0001μA 1.8V~3.6V ±0.9V~1.8V TLV2782 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV2782CDGKRG4
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 915
  • Description: 23mA per Channel 2.5pA 50 dB Instrumentational OP Amps 0.0001μA 1.8V~3.6V ±0.9V~1.8V TLV2782 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 2.7V
Terminal Pitch 0.65mm
Base Part Number TLV2782
Pin Count 8
Output Type Rail-to-Rail
Number of Elements 2
Operating Supply Current 650μA
Nominal Supply Current 1.54mA
Power Dissipation 481mW
Output Current 23mA
Slew Rate 5V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 50 dB
Current - Input Bias 2.5pA
Voltage - Supply, Single/Dual (±) 1.8V~3.6V ±0.9V~1.8V
Output Current per Channel 23mA
Input Offset Voltage (Vos) 3mV
Bandwidth 8MHz
Unity Gain BW-Nom 8000 kHz
Voltage Gain 120dB
Average Bias Current-Max (IIB) 0.0001μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 4V
Voltage - Input Offset 250μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.000015μA
Programmable Power NO
Nominal Gain Bandwidth Product 8MHz
Max I/O Voltage 3mV
Input Offset Current-Max (IIO) 0.000015μA
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV2782CDGKRG4 Overview


There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 2.7V. Instrumentation amplifier is a part of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 3mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 650μA, this op amp ic can operate. Voltage gain should remain at 120dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. A total of 2 elements are present in this linear amplifier. A TR-shaped amplifier is used to pack the buffer amps.

TLV2782CDGKRG4 Features


8 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail

TLV2782CDGKRG4 Applications


There are a lot of Texas Instruments TLV2782CDGKRG4 Instrumentational OP Amps applications.

  • Fission chambers
  • Signal filtering
  • RF cable systems
  • E-book readers
  • Commercial audio systems
  • PDA
  • Laptop
  • Switching amplifier
  • Subtraction operation circuits
  • Wireless base stations

Write a review

Note: HTML is not translated!
    Bad           Good