TLV2782IDGKR

23mA per Channel 2.5pA 50 dB Instrumentational OP Amps 0.0003μA 3V 1.8V~3.6V ±0.9V~1.8V TLV2782 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2782IDGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 750
Description: 23mA per Channel 2.5pA 50 dB Instrumentational OP Amps 0.0003μA 3V 1.8V~3.6V ±0.9V~1.8V TLV2782 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	2.5pA
Voltage - Supply, Single/Dual (±)	1.8V~3.6V ±0.9V~1.8V
Output Current per Channel	23mA
Input Offset Voltage (Vos)	3mV
Bandwidth	8MHz
Unity Gain BW-Nom	8000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0003μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	4V
Voltage - Input Offset	250μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.000015μA
Programmable Power	NO
Nominal Gain Bandwidth Product	8MHz
Max I/O Voltage	3mV
Input Offset Current-Max (IIO)	0.000015μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Max Power Dissipation	481mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Base Part Number	TLV2782
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Elements	2
Operating Supply Current	650μA
Nominal Supply Current	1.54mA
Power Dissipation	481mW
Output Current	23mA
Slew Rate	5V/μs
Architecture	VOLTAGE-FEEDBACK

TLV2782IDGKR Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 2.7V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 8 pins that make up the linear amplifier. Op amp rates 3mV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 650μA and 10 . Keeping the voltage gain at 120dB is the best course of action. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. It is possible to count 2 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. To pack the operational amplifier ics, TR is adopted as the packing method.