Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLV27L1 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Elements |
1 |
Operating Supply Current |
7μA |
Nominal Supply Current |
11μA |
Power Dissipation |
710mW |
Output Current |
400μA |
Slew Rate |
0.06V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
71 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Output Current per Channel |
400μA |
Input Offset Voltage (Vos) |
5mV |
Bandwidth |
160 kHz |
Unity Gain BW-Nom |
160 kHz |
Voltage Gain |
100dB |
Power Supply Rejection Ratio (PSRR) |
74dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
500μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Nominal Gain Bandwidth Product |
180 kHz |
Max I/O Voltage |
5mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV27L1ID Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 8 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 7μA . 100dB should be the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V.
TLV27L1ID Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
TLV27L1ID Applications
There are a lot of Texas Instruments TLV27L1ID Instrumentational OP Amps applications.
- Wireless base stations
- Weighing systems
- Thermocouples
- Multiplication circuits
- High-frequency data acquisition systems
- Television
- Polarized electrodes
- Non-polarized electrodes
- Tablets
- Computer workstations