Parameters |
Nominal Supply Current |
5μA |
Max Supply Current |
5μA |
Propagation Delay |
13.5 μs |
Quiescent Current |
5μA |
Response Time |
12000 ns |
Common Mode Rejection Ratio |
74 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
12mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
10pA |
Input Bias Current |
10pA |
Voltage - Input Offset (Max) |
12mV @ 5.5V |
Current - Input Bias (Max) |
10pA @ 5.5V |
CMRR, PSRR (Typ) |
74dB CMRR, 80dB PSRR |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.95mm |
Base Part Number |
TLV3011 |
Pin Count |
6 |
Output Type |
Open Drain |
Number of Elements |
1 |
Power Supplies |
2/5V |
TLV3011AIDBVTG4 Overview
For convenience, it is packaged in SOT-23-6 .There is a Open Drain output type for this comparator.This device is designed in Tape & Reel (TR) case.There are6 terminals on the comparator.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a with Voltage Reference chip.The total number of elements is 1 .There are 6 pins on this board.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 6 pins.Search TLV3011 to find more pin-to-pin solutions.In this comparator, the quiescent current is 5μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 5μA when using the device.A current supply greater than 5μA may result in the comparator malfunctioning.In order to run the device, there are only 2/5V power supplies required.There is a maximum current that can be input into the device of 10pA .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLV3011AIDBVTG4 Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
TLV3011AIDBVTG4 Applications
There are a lot of Texas Instruments TLV3011AIDBVTG4 linear comparators applications.
- Zero-Crossing Detectors
- Industrial
- General-Purpose, Low-Voltage Applications
- Building automation
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Simple Analog-to-Digital Converters (ADCs)
- Wireless Base Stations
- Infotainment & cluster
- Threshold Detectors