TLV3011AIDCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3011 |
| Pin Count | 6 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 5μA |
| Output Current | 500μA |
| Max Supply Current | 5μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 5μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 12mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 12mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3011AIDCKR Overview
In order to make transportation easier, it is packaged in 6-TSSOP, SC-88, SOT-363 .The comparator has a Open Drain output.The part is shipped by Tape & Reel (TR) .The comparator has 6 terminals.Other Comparator like the device play a important role in the industry.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a with Voltage Reference chip.In total, it contains 1 elements.As a result, it contains 6 pins.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 6 pins.Alternatively, you may search for TLV3011 to find more pin-to-pin solutions for your specific needs.A quiescent current of 5μA is observed in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 5μA .The compartator could be damaged if the current supply exceeds 5μA .The device can be run with 2/5V power supplies.The maximal current your can input into the device is 10pA .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLV3011AIDCKR Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
TLV3011AIDCKR Applications
There are a lot of Texas Instruments TLV3011AIDCKR linear comparators applications.
- Automatic Test Equipment
- Consumer Medical Electronics
- Metering Systems
- Zero-Crossing Detectors
- General Purpose Low Voltage Applications
- Portable and Battery-Powered Systems
- General-Purpose, Low-Voltage Applications
- Analog front end
- High-Speed Differential Line Receiver
- Industrial
