TLV3011AIDCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV3011 |
| Pin Count | 6 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 5μA |
| Output Current | 500μA |
| Max Supply Current | 5μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 5μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 12mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 12mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3011AIDCKT Overview
For convenience, it is packaged in 6-TSSOP, SC-88, SOT-363 .The comparator has an output type of Open Drain .This device is designed in Cut Tape (CT) case.Electronic comparator is possible to find the 6 terminals of the comparator.Electronic comparator is a part of Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.Speaking of types, this is a typical with Voltage Reference comparator.This element consists of 1 elements in total.Electronic comparator has 6 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.There are 6 pins on the comparator.Search TLV3011 to find more pin-to-pin solutions.The comparator displays a quiescent current of 5μA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to 5μA .A current supply greater than 5μA may cause the comparator to malfunction.The device can be operated with 2/5V power supplies.Input current to the device cannot exceed 10pA .With a TR package, this device is designed for general use (usually in ADC circuits).
TLV3011AIDCKT Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5μA
TLV3011AIDCKT Applications
There are a lot of Texas Instruments TLV3011AIDCKT linear comparators applications.
- Body Control Modules
- Notebooks and PDAs
- Infotainment and Clusters
- Power Supervision
- Self-diagnostics
- Battery management and protection
- High-Speed Sampling Circuits
- Security Detection Systems
- Wearable Devices
- Automatic Test Equipment
