TLV3011AMDBVREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV3011 |
| Pin Count | 6 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 5μA |
| Max Supply Current | 5μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 5μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3011AMDBVREP Overview
The product is packaged in SOT-23-6 for ease of transportation.A comparator with a Open Drain output is used here.The chip is packaged with Tape & Reel (TR) .There are6 terminals on the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 1.8V .The type of the chip can be classified as with Voltage Reference .Currently, it consists of only 1 elements.The pinout of the component starts from 6 pins it has.The recommended mounting type is Surface Mount .As a precaution, it is recommended to set the operating temperature to -55°C~125°C to prevent malfunctions.There are 6 pins on the comparator.Try search TLV3011 to get more pin-to-pin solutions for your special needs.The comparator displays a quiescent current of 5μA .A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 5μA .A supply current exceeding 5μA may result in the comparator malfunctioning.The device can be run with 2/5V power supplies.You can input a maximum current of 10pA into this device.This device is usually used in ADC circuits (packaged in TR ).
TLV3011AMDBVREP Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -55°C~125°C
Quiescent Current: 5μA
TLV3011AMDBVREP Applications
There are a lot of Texas Instruments TLV3011AMDBVREP linear comparators applications.
- Power management
- Zero-Crossing Detectors
- Battery-Powered Electronics
- Battery management and protection
- Consumer Medical Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Current and voltage sensing
- Hand-Held Electronics
- Handheld Instruments
- Window Comparators
