TLV3012AIDBVR
| Parameters | |
|---|---|
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 12mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV3012 |
| Pin Count | 6 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 5μA |
| Output Current | 500μA |
| Max Supply Current | 5μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 5μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 12mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10pA |
TLV3012AIDBVR Overview
The product is packaged in SOT-23-6 to facilitate transportation.A comparator with an output type of Push-Pull is being used.As a result, it is designed with Tape & Reel (TR) package.The comparator has 6 terminals.The electrical component in this case belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.This is a typical comparator of type with Voltage Reference .There are a total of 1 elements in it.As a result, it contains 6 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 6 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV3012 .There is 5μA current flowing in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 5μA when using the device.A current supply greater than 5μA may cause the comparator to malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 2/5V power supplies.There is a maximum current that can be input into the device of 10pA .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLV3012AIDBVR Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5μA
TLV3012AIDBVR Applications
There are a lot of Texas Instruments TLV3012AIDBVR linear comparators applications.
- DC/DC and AC/DC power supplies
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Factory automation & control
- Notebooks and PDAs
- Power management
- Mobile Phones
- Simple Analog-to-Digital Converters (ADCs)
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
