TLV3012AIDBVRG4
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV3012 |
| Pin Count | 6 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 5μA |
| Output Current | 500μA |
| Max Supply Current | 5μA |
| Propagation Delay | 13.5 μs |
| Quiescent Current | 5μA |
| Response Time | 12000 ns |
| Common Mode Rejection Ratio | 74 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 12mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 12mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| CMRR, PSRR (Typ) | 74dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
TLV3012AIDBVRG4 Overview
To facilitate transportation, it comes packaged in SOT-23-6 .There is a Push-Pull output type for this comparator.This device is designed in Tape & Reel (TR) case.Electronic comparator is possible to find the 6 terminals of the comparator.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical with Voltage Reference comparator.In total, it contains 1 elements.There are 6 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .This comparator has 6 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLV3012 .As a result, this comparator displays a quiescent current of 5μA .A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 5μA .An excess of current supply over 5μA could result in malfunction of the comparator.There is sufficient power to run the device from 2/5V power supplies.There is a maximum current that can be input into the device of 10pA .Often found in ADC circuits, this device is packed in TR .
TLV3012AIDBVRG4 Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5μA
TLV3012AIDBVRG4 Applications
There are a lot of Texas Instruments TLV3012AIDBVRG4 linear comparators applications.
- Self-diagnostics
- Infotainment & cluster
- Current and voltage sensing
- Power management
- Battery-Powered Electronics
- General-Purpose, Low-Voltage Applications
- Wearable Devices
- Building automation
- Limit Comparators
- Alarm and Monitoring Circuits
