banner_page

TLV3012AIDCKR

Surface Mount Tape & Reel (TR) 500μA mA 12000 ns μs Linear Comparators 10pA pA 12mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV3012AIDCKR
  • Package: 6-TSSOP, SC-88, SOT-363
  • Datasheet: -
  • Stock: 297
  • Description: Surface Mount Tape & Reel (TR) 500μA mA 12000 ns μs Linear Comparators 10pA pA 12mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-TSSOP, SC-88, SOT-363
Number of Pins 6
Weight 28.009329mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Type with Voltage Reference
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TLV3012
Pin Count 6
Output Type Push-Pull
Number of Elements 1
Power Supplies 2/5V
Operating Supply Current 5μA
Output Current 500μA
Propagation Delay 13.5 μs
Quiescent Current 5μA
Supply Current-Max 0.005mA
Response Time 12000 ns
Common Mode Rejection Ratio 74 dB
Voltage - Supply, Single/Dual (±) 1.8V~5.5V
Supply Type Single
Input Offset Voltage (Vos) 12mV
Power Supply Rejection Ratio (PSRR) 80dB
Supply Voltage Limit-Max 7V
Max Input Current 10pA
Input Bias Current 10pA
Voltage - Input Offset (Max) 12mV @ 5.5V
Current - Input Bias (Max) 10pA @ 5.5V
CMRR, PSRR (Typ) 74dB CMRR, 80dB PSRR
Height 1.1mm
Length 2mm
Width 1.25mm
Thickness 900μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV3012AIDCKR Overview


In order to facilitate transportation, it is packaged in 6-TSSOP, SC-88, SOT-363 .A comparator with a Push-Pull output is used here.As a result, it is designed with Tape & Reel (TR) package.There are6 terminals on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type with Voltage Reference .Electronic comparator consists of 1 elements in total.The device contains 6 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .6 pins are available on the comparator.You can find more pin-to-pin solutions by searching TLV3012 .There is a quiescent current of 5μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.There is sufficient power to run the device from 2/5V power supplies.Electronic comparator is possible to input a maximum current of 10pA into the device.Providing a minimum current of 0.005mA is possible for this part.Often found in ADC circuits, this device is packed in TR .

TLV3012AIDCKR Features


Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5μA

TLV3012AIDCKR Applications


There are a lot of Texas Instruments TLV3012AIDCKR linear comparators applications.

  • Lithium ion battery monitoring
  • Battery management and protection
  • Handheld Instruments
  • General-Purpose Portable Devices
  • General Purpose Low Voltage Applications
  • Portable Battery Monitoring
  • Motor drives
  • System control and monitoring
  • Simple Analog-to-Digital Converters (ADCs)
  • Metering Systems

Write a review

Note: HTML is not translated!
    Bad           Good