Parameters |
Voltage - Input Offset (Max) |
12mV @ 5.5V |
Current - Input Bias (Max) |
10pA @ 5.5V |
CMRR, PSRR (Typ) |
74dB CMRR, 80dB PSRR |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-TSSOP, SC-88, SOT-363 |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLV3012 |
Pin Count |
6 |
Output Type |
Push-Pull |
Number of Elements |
1 |
Power Supplies |
2/5V |
Nominal Supply Current |
5μA |
Max Supply Current |
5μA |
Propagation Delay |
13.5 μs |
Quiescent Current |
5μA |
Response Time |
12000 ns |
Common Mode Rejection Ratio |
74 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
12mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Input Bias Current |
10pA |
TLV3012AIDCKRG4 Overview
For convenience, it is packaged in 6-TSSOP, SC-88, SOT-363 .Output type of this comparator is Push-Pull .The part is shipped by Tape & Reel (TR) .There are 6 terminals on the comparator.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical with Voltage Reference comparator.This element consists of 1 elements in total.A total of 6 pins are included.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .This comparator has 6 pins.Alternatively, you may search for TLV3012 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 5μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current be 5μA in order to use the device normally.A current supply greater than 5μA may cause the comparator to malfunction.The device can be run with 2/5V power supplies.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLV3012AIDCKRG4 Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5μA
TLV3012AIDCKRG4 Applications
There are a lot of Texas Instruments TLV3012AIDCKRG4 linear comparators applications.
- Factory automation & control
- Hand-Held Electronics
- Industrial
- High-Speed Sampling Circuits
- Handheld Instruments
- Zero-Crossing Detectors
- Window Comparators
- General-Purpose Portable Devices
- Ultra-Low Power Systems
- RC Timers