TLV32012KIDBTRG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 30 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Pin Count | 30 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Input Type | SINGLE-ENDED/DIFF |
| Resolution | 2 B |
| Sampling Rate | 104 ksps |
| Power Consumption | 11.2mW |
| Max Output Power | 190mW |
| Telecom IC Type | PROGRAMMABLE CODEC |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Number of D/A Converters | 1 |
| Number of Analog Inputs | 3 |
| Filter | YES |
| Output Code | TWOS COMPLEMENT |
| Input Code | TWOS COMPLEMENT |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLV32012KIDBTRG4 Overview
A TSSOP package is supplied for space savings. Tape & Reel (TR) is the packaging method used. In order to prevent signal reflections from off the end of the transmission line, 30 terminations are used. This is a 30-pin electronic device. The board has 30 pins configured. The maximum value of supply voltage should be maintained at 3.6V. The electronic part has been classified as Codecs. It is recommended to maintain a voltage of 1.1V as the minimum value. The supply voltage is set to 1.8V. Digital signals are converted into analog signals with 1 D/A converters. 85°C is set as the maximum operating temperature for normal operation. Normal operation is maintained by setting the operating temperature low at -40°C. It is designed with 2 channels for data transmission. The device is equipped with 3 analog inputs. There should be no voltage greater than 2V on the analog input.
TLV32012KIDBTRG4 Features
Embedded in the TSSOP package
3 analog inputs
TLV32012KIDBTRG4 Applications
There are a lot of Texas Instruments TLV32012KIDBTRG4 CODECs Interface ICs applications.
- Microprocessor
- Subtraction
- Flight simulators
- Textile manufacturing
- CT and MRI scanning machinery
- Demultiplexing
- Rotating radar platforms
- Automatic health monitoring systems
- Conveying
- Radiation therapy
