banner_page

TLV3202AIDGK

Surface Mount Tube 47 ns μs Linear Comparators 50pA pA 50μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV3202AIDGK
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: -
  • Stock: 263
  • Description: Surface Mount Tube 47 ns μs Linear Comparators 50pA pA 50μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number TLV3202
Pin Count 8
Output Type Push-Pull
Number of Elements 2
Power Supplies 3/5V
Nominal Supply Current 50μA
Max Supply Current 40μA
Propagation Delay 50 ns
Quiescent Current 50μA
Response Time 47 ns
Common Mode Rejection Ratio 70 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Input Offset Voltage (Vos) 5mV
Average Bias Current-Max (IIB) 0.00005μA
Power Supply Rejection Ratio (PSRR) 85dB
Supply Voltage Limit-Max 7V
Max Input Current 50pA
Input Bias Current 50pA
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 50pA @ 5V
Hysteresis 1.2mV
CMRR, PSRR (Typ) 70dB CMRR, 85dB PSRR
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV3202AIDGK Overview


Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.There is a comparator of type Push-Pull output on this device.This chip is designed with the Tube package.The device is designed with 8 terminations.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .Currently, it consists of only 2 elements.Electronic comparator includes 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV3202 .There is a quiescent current of 50μA in this comparator.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 50μA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 40μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.You can input a maximum current of 50pA into this device.

TLV3202AIDGK Features


Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 50μA

TLV3202AIDGK Applications


There are a lot of Texas Instruments TLV3202AIDGK linear comparators applications.

  • Set Top Boxes
  • General-Purpose, Low-Voltage Applications
  • Simple Analog-to-Digital Converters (ADCs)
  • Ultra-Low Power Systems
  • Window Comparators, Multivibrators
  • Power management
  • Handheld Instruments
  • Self-diagnostics
  • Current and voltage sensing
  • Body Control Modules

Write a review

Note: HTML is not translated!
    Bad           Good