banner_page

TLV3202AIDGKR

Surface Mount Tape & Reel (TR) 47 ns μs Linear Comparators 50pA pA 50μA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV3202AIDGKR
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: -
  • Stock: 559
  • Description: Surface Mount Tape & Reel (TR) 47 ns μs Linear Comparators 50pA pA 50μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Subcategory Comparator
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number TLV3202
Pin Count 8
Output Type Push-Pull
Number of Elements 2
Power Supplies 3/5V
Nominal Supply Current 50μA
Max Supply Current 40μA
Propagation Delay 50 ns
Quiescent Current 50μA
Response Time 47 ns
Common Mode Rejection Ratio 70 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Input Offset Voltage (Vos) 5mV
Average Bias Current-Max (IIB) 0.00005μA
Power Supply Rejection Ratio (PSRR) 85dB
Supply Voltage Limit-Max 7V
Max Input Current 50pA
Input Bias Current 50pA
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 50pA @ 5V
Hysteresis 1.2mV
CMRR, PSRR (Typ) 70dB CMRR, 85dB PSRR
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV3202AIDGKR Overview


In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with a Push-Pull output is used here.The part will be shipped by Tape & Reel (TR) .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical General Purpose comparator.Currently, it consists of only 2 elements.The device includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator is equipped with 8 pins.Try search TLV3202 to get more pin-to-pin solutions for your special needs.A quiescent current of 50μA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 50μA .A current supply greater than 40μA may cause the comparator to malfunction.3/5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum current of 50pA into the device.Packed in TR , this device is for general uses (often in ADC circuits).

TLV3202AIDGKR Features


Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 50μA

TLV3202AIDGKR Applications


There are a lot of Texas Instruments TLV3202AIDGKR linear comparators applications.

  • Zero-Crossing Detectors
  • Security Detection Systems
  • Pulse, Squarewave, and Time Delay Generators
  • Motor drives
  • Lithium ion battery monitoring
  • Mobile Phones and Tablets
  • Handheld Instruments
  • System control and monitoring
  • Consumer Medical Electronics
  • Wireless Base Stations

Write a review

Note: HTML is not translated!
    Bad           Good