Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLV3202 |
Pin Count |
8 |
Output Type |
Push-Pull |
Number of Elements |
2 |
Power Supplies |
3/5V |
Nominal Supply Current |
50μA |
Max Supply Current |
40μA |
Propagation Delay |
50 ns |
Quiescent Current |
50μA |
Response Time |
47 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.00005μA |
Power Supply Rejection Ratio (PSRR) |
85dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
50pA |
Input Bias Current |
50pA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
50pA @ 5V |
Hysteresis |
1.2mV |
CMRR, PSRR (Typ) |
70dB CMRR, 85dB PSRR |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV3202AIDR Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a Push-Pull output.The chip is packaged with Cut Tape (CT) .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 2 elements.Electronic comparator includes 8 pins.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .8 pins are present on the comparator.Alternatively, you may search for TLV3202 to find more pin-to-pin solutions for your specific needs.As a result, this comparator displays a quiescent current of 50μA .The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 50μA .A supply current exceeding 40μA may result in the comparator malfunctioning.This device requires 3/5V power supplies to operate.Electronic comparator is possible to input up to 50pA current into the device.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLV3202AIDR Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 50μA
TLV3202AIDR Applications
There are a lot of Texas Instruments TLV3202AIDR linear comparators applications.
- Point of load regulators
- Portable Battery Monitoring
- Wearable Devices
- Wide Range VCO; MOS Clock Timers
- System control and monitoring
- Handheld Instruments
- Zero-Crossing Detectors
- Hand-Held Electronics
- Alarm and Monitoring Circuits
- Current and voltage sensing