TLV320AIC1106PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 78.187985mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | PCM |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV320AIC1106 |
| Output | VOLTAGE |
| Pin Count | 20 |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Interface | Serial |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 7mA |
| Number of Bits | 13 |
| Bandwidth | 3.4 kHz |
| Data Interface | PCM Audio Interface |
| Sampling Rate | 8 ksps |
| Voltage - Supply, Analog | 2.7V~3.3V |
| Voltage - Supply, Digital | 2.7V~3.3V |
| Power Consumption | 13.5mW |
| Signal to Noise Ratio (SNR) | 68 dB |
| Resolution (Bits) | 13 b |
| Number of Analog Inputs | 1 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Companding Law | MU-LAW |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC1106PW Overview
Space-saving reasons have led to it being packaged in a 20-TSSOP (0.173, 4.40mm Width) package. As a packaging method, Tube is adopted. Because it is a type of PCM, it delivers high-efficiency performance in many applications. As a mounting type, it uses Surface Mount. It is able to operate normally when the operating performance is set at -40°C~85°C. Integrated ADCs / DACs are available in 1 / 1. The analog circuit receives 2.7V~3.3V as a supply voltage. The digital circuit is provided with the supply voltage of 2.7V~3.3V. Transmission lines have 20 terminations to prevent signals from reflecting. In terms of electronics, it is a 20-pin device. There are 20 pins on it. Its base part number TLV320AIC1106 can be used to find more related parts. It is recommended to maintain the maximum supply voltage at 3.3V. The electronic part has been classified as Codecs. 2.7V should be the minimum value of supply voltage. There is no supply voltage for it. Power supplies of 3V are required to operate it. Transmission of data takes place over 1 channels. Information is stored using 13 bits. There are 1 analog inputs on it. With a voltage of 7mA, it operates.
TLV320AIC1106PW Features
Embedded in the 20-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 analog inputs
Operating supply current of 7mA
TLV320AIC1106PW Applications
There are a lot of Texas Instruments TLV320AIC1106PW CODECs Interface ICs applications.
- Electronics industry
- Steel mills
- CT and MRI scanning machinery
- Multiplication
- RF-based home automation system
- Spooling or level wind
- Counting applications
- Translating the decimal values to the binary
- Medical industry
- Printing
