TLV320AIC1110PBSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.801575mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | PCM |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TLV320AIC1110 |
| Pin Count | 32 |
| Power Supplies | 3V |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 2.7V |
| Supply Current-Max | 0.006mA |
| Data Interface | PCM Audio Interface |
| Sampling Rate | 8 ksps |
| Voltage - Supply, Analog | 2.7V~3.3V |
| Voltage - Supply, Digital | 2.7V~3.3V |
| Power Consumption | 12mW |
| Resolution (Bits) | 15 b |
| Number of DAC Channels | 1 |
| Number of Analog Inputs | 2 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Output Code | TWOS COMPLEMENT |
| Companding Law | A/MU-LAW |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC1110PBSR Overview
In order to save space, it is packaged in the 32-TQFP package. Packaging is done in the form of a Tape & Reel (TR). The high-efficiency performance of this electronic part can be achieved in various applications due to its type of PCM. It uses a mounting type of Surface Mount. A performance setting of -40°C~85°C allows it to operate normally. It features 1 / 1 ADCs / DACs. The analog circuit receives 2.7V~3.3V as a supply voltage. It is supplied with a voltage of 2.7V~3.3V to power the digital circuit. In order to prevent signal reflections from off the end of the transmission line, 32 terminations are used. 32-pin electronic devices are what it is. There are 32 pins on it. Its base part number TLV320AIC1110 can be used to find more related parts. In order for the supply voltage to be maintained at 3.3V, it should be set to its maximum value. A part in this category is classified as subcategory Codecs. The minimum value of supply voltage should be maintained at 2.7V. It operates with the supply voltage of 3V. The power supply for this device is 3V. It is easy to operate them since the supply current is kept below 0.006mA. There are 2 analog inputs on the device. An analog output can be sampled from a numerical value by 1 DAC channels.
TLV320AIC1110PBSR Features
Embedded in the 32-TQFP package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
2 analog inputs
TLV320AIC1110PBSR Applications
There are a lot of Texas Instruments TLV320AIC1110PBSR CODECs Interface ICs applications.
- Robotic arm positioning
- Data transfer
- Registration mark timing
- Cut-to-length
- Feature extraction
- Packaging
- Motor speed /RPM readout
- Demultiplexing
- High-performance memory system
- Chemical dosing pumps
