TLV320AIC12IDBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC12 |
| Output | VOLTAGE |
| Pin Count | 30 |
| Number of Channels | 4 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Supply Current-Max | 2mA |
| Data Interface | Serial |
| Sampling Rate | 104 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 1 |
| Output Voltage-Max | 2.35V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 85 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC12IDBT Overview
In order to save space, it is packaged in the 30-TFSOP (0.173, 4.40mm Width) package. Packaging is done in the form of a Tube. This electronic component is of the type Voice-Band, allowing it to provide high-efficiency performance in various applications. Surface Mount is the mounting type employed by this device. Operating performance at -40°C~85°C makes it possible to operate normally. It is equipped with a total of 1 / 1 ADCs and DACs. In the analog circuit, the supply voltage is 2.7V~3.6V. 1.65V~1.95V is the supply voltage for the digital circuit. In order to avoid reflections off the end of the transmission line, 30 terminations are used. Essentially, it is an electronic device with 30 pins. There are 30 pins configured on this board. Its base part number TLV320AIC12 can be used to find more related parts. An integrated circuit is mounted on a PCB based on the technology of Surface Mount. Supply voltage should never exceed 3.6V. Analog signals are converted to digital signals by means of 1 A/D converters. This electronic part is classified into the subcategory of Codecs. It is recommended that the supply voltage is maintained at 1.1V. It operates on a supply voltage of 1.8V. For data transmission, the device has 4 channels. By keeping the supply current below 2mA, they are easy to operate. It is recommended not to exceed 2V for analog input voltage.
TLV320AIC12IDBT Features
Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters
TLV320AIC12IDBT Applications
There are a lot of Texas Instruments TLV320AIC12IDBT CODECs Interface ICs applications.
- Aerospace
- Ball screw positioning
- Packaging
- Timber products
- Automated Guided Vehicles (AGV)
- Galvanometer scanners
- Sawmills
- Web tensioning
- Speed measurement
- Robotics
