banner_page

TLV320AIC12IDBTG4

TLV320AIC12IDBTG4 datasheet pdf and Interface - CODECs product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV320AIC12IDBTG4
  • Package: 30-TFSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 393
  • Description: TLV320AIC12IDBTG4 datasheet pdf and Interface - CODECs product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 30-TFSOP (0.173, 4.40mm Width)
Number of Pins 30
Weight 97.49401mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 30
Type Voice-Band
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Codecs
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Base Part Number TLV320AIC12
Output VOLTAGE
Pin Count 30
Number of Channels 4
Interface 2-Wire, I2C, Serial
Max Supply Voltage 3.6V
Min Supply Voltage 1.1V
Data Interface Serial
Sampling Rate 104 ksps
Voltage - Supply, Analog 2.7V~3.6V
Voltage - Supply, Digital 1.65V~1.95V
Number of A/D Converters 1
Output Voltage-Max 2.35V
Analog Input Voltage-Max 2V
Signal to Noise Ratio (SNR) 84 dB
Resolution (Bits) 16 b
Sigma Delta Yes
Number of ADCs / DACs 1 / 1
Filter YES
Dynamic Range, ADCs / DACs (db) Typ 85 / 92
Output Code TWOS COMPLEMENT
S/N Ratio, ADCs / DACs (db) Typ 84 / 92
Input Code TWOS COMPLEMENT
Length 7.8mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV320AIC12IDBTG4 Overview


Space-saving is achieved by supplying it in the 30-TFSOP (0.173, 4.40mm Width) package. We have adopted the packaging method of Tube. Because it is a type of Voice-Band, it delivers high-efficiency performance in many applications. The mounting type of this device is Surface Mount. Operating performance at -40°C~85°C makes it possible to operate normally. The board is integrated with 1 / 1 ADCs and DACs. Supply voltage 2.7V~3.6V is provided to the analog circuit. There is a supply voltage of 1.65V~1.95V provided to the digital circuit. 30 terminations prevent signals from reflecting off transmission lines. The device has 30 pins. The board has 30 pins configured. More related parts can be found by using its base part number TLV320AIC12. On a PCB based on Surface Mount technology, it is mounted. Supply voltage should never exceed 3.6V. To convert analog signals into digital signals, there are 1 A/D converters. It is classified as a Codecs electronic part. It is recommended that the supply voltage is maintained at 1.1V. It operates on a supply voltage of 1.8V. For data transmission, the device has 4 channels. 2V is the maximum voltage that should be allowed for an analog input.

TLV320AIC12IDBTG4 Features


Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters

TLV320AIC12IDBTG4 Applications


There are a lot of Texas Instruments TLV320AIC12IDBTG4 CODECs Interface ICs applications.

  • Wire number reduction in a particular circuits
  • Automated Guided Vehicles (AGV)
  • Material handling
  • Radiation therapy
  • Material handling
  • Ships navigation
  • Servo motors
  • Code conversion
  • Addition
  • Linear distance measurement

Write a review

Note: HTML is not translated!
    Bad           Good