TLV320AIC12IDBTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC12 |
| Output | VOLTAGE |
| Pin Count | 30 |
| Number of Channels | 4 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Supply Current-Max | 2mA |
| Data Interface | Serial |
| Sampling Rate | 104 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 1 |
| Output Voltage-Max | 2.35V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 85 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC12IDBTR Overview
For space-saving purposes, it is packaged in 30-TFSOP (0.173, 4.40mm Width). This package uses the Tape & Reel (TR) packaging method. Its Voice-Band type ensures high-efficiency performance in a range of applications. This device employs the mounting type Surface Mount. A -40°C~85°C operating performance setting allows it to operate normally. 1 / 1 ADC / DAC is integrated into it. Supply voltage is 2.7V~3.6V for the analog circuit. A 1.65V~1.95V supply voltage is applied to the digital circuit. Transmission lines have 30 terminations to prevent signals from reflecting. Essentially, it is an electronic device with 30 pins. There are 30 pins on it. More related parts can be found by using its base part number TLV320AIC12. Mounted on a PCB based on the technology of Surface Mount. It is recommended to maintain the maximum supply voltage at 1.95V. Digital signals are converted from analog signals using 1 A/D converters. There is a subcategory of Codecs for this electronic part. Minimum supply voltage should remain at 1.65V. The supply voltage is set to 1.8V. In order to transmit data, it is designed with 4 channels. They can operate with ease if the supply current is kept below 2mA. No analog input voltage should exceed 2V.
TLV320AIC12IDBTR Features
Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters
TLV320AIC12IDBTR Applications
There are a lot of Texas Instruments TLV320AIC12IDBTR CODECs Interface ICs applications.
- Autonomous vehicles & robots
- Automation
- Demultiplexing
- Elevators
- Half adders
- Speed measurement
- Detecting interrupts in microprocesstor applications
- Off-Highway Vehicles (OHV)
- Motor feedback
- Microprocessor
