TLV320AIC12KIRHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TLV320AIC12 |
| Pin Count | 32 |
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Supply Current-Max | 2mA |
| Data Interface | Serial |
| Sampling Rate | 104 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Power Consumption | 11.2mW |
| Max Output Power | 190mW |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Number of DAC Channels | 1 |
| Number of Analog Inputs | 3 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 85 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC12KIRHBT Overview
For space-saving purposes, it is packaged in 32-VFQFN Exposed Pad. Tape & Reel (TR) is the packaging method used. This electronic part is categorized as a type of Voice-Band, making it capable of providing high-efficiency performance in a variety of applications. It uses a mounting type of Surface Mount. When the operating performance is set to -40°C~85°C, it can operate normally. Integrated ADCs / DACs are available in 1 / 1. Supply voltage 2.7V~3.6V is provided to the analog circuit. A supply voltage of 1.65V~1.95V is applied to the digital circuit. In order to avoid reflections off the end of the transmission line, 32 terminations are used. There are 32 pins on this device. It is configured with 32 pins. Find more related parts by using its base part number TLV320AIC12. Ideally, the supply voltage should remain at 3.6V. It is classified under the subcategory of Codecs. 1.1V should be the minimum value of supply voltage. There is 1.8V supply voltage for this device. It is easy to operate them since the supply current is kept below 2mA. The device has 3 analog inputs. It is recommended not to exceed 2V for analog input voltage. 1 DAC channels are available to sample analog outputs from numerical values.
TLV320AIC12KIRHBT Features
Embedded in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
3 analog inputs
TLV320AIC12KIRHBT Applications
There are a lot of Texas Instruments TLV320AIC12KIRHBT CODECs Interface ICs applications.
- Textiles
- Robotics vehicle with the metal detector
- Image search
- Image compression
- Chemical dosing pumps
- Dimensionality reduction
- Autonomous vehicles & robots
- Automation
- Wire number reduction in application that have multiple inputs
- High-performance memory system
