Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
30-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
30 |
Weight |
97.49401mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
30 |
Type |
Voice-Band |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Codecs |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Base Part Number |
TLV320AIC13 |
Output |
VOLTAGE |
Pin Count |
30 |
Number of Channels |
2 |
Interface |
2-Wire, I2C, Serial |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.1V |
Data Interface |
Serial |
Sampling Rate |
104 ksps |
Voltage - Supply, Analog |
2.7V~3.6V |
Voltage - Supply, Digital |
1.65V~1.95V |
Number of A/D Converters |
1 |
Output Voltage-Max |
2.35V |
Analog Input Voltage-Max |
2V |
Signal to Noise Ratio (SNR) |
84 dB |
Resolution (Bits) |
16 b |
Sigma Delta |
Yes |
Number of ADCs / DACs |
1 / 1 |
Filter |
YES |
Dynamic Range, ADCs / DACs (db) Typ |
85 / 92 |
Output Code |
TWOS COMPLEMENT |
S/N Ratio, ADCs / DACs (db) Typ |
84 / 92 |
Input Code |
TWOS COMPLEMENT |
Length |
7.8mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV320AIC13IDBTG4 Overview
A 30-TFSOP (0.173, 4.40mm Width) package is provided to save space. The packaging way of Tube is adopted. This electronic component is of the type Voice-Band, allowing it to provide high-efficiency performance in various applications. It uses a mounting type of Surface Mount. A -40°C~85°C operating performance setting allows it to operate normally. It is equipped with a total of 1 / 1 ADCs and DACs. There is a voltage supply of 2.7V~3.6V to the analog circuit. Supply voltage is set to 1.65V~1.95V for the digital circuit. In order to prevent signal reflections from off the end of the transmission line, 30 terminations are used. The device has 30 pins. There are 30 pins configured on this board. Its base part number TLV320AIC13 can be used to find more related parts. Using Surface Mount technology, it is mounted to a PCB. The maximum value of supply voltage should be maintained at 3.6V. There are 1 A/D converters used to convert the analog signals into digital signals. Subcategory Codecs applies to this electronic part. Maintaining a minimum voltage of 1.1V is recommended. The supply voltage is set to 1.8V. The data transmission channel count is 2. A maximum analog input voltage of 2V should not be exceeded.
TLV320AIC13IDBTG4 Features
Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters
TLV320AIC13IDBTG4 Applications
There are a lot of Texas Instruments TLV320AIC13IDBTG4 CODECs Interface ICs applications.
- Registration mark timing
- Metal forming & fabrication
- High-performance memory systems
- Addition
- Ball screw positioning
- Conveying
- Radiation therapy
- Printing
- Automatic health monitoring systems
- Dynamic applications