TLV320AIC14IDBTRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC14 |
| Output | VOLTAGE |
| Pin Count | 30 |
| Number of Channels | 2 |
| Interface | 2-Wire, I2C, I2S, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Data Interface | Serial |
| Sampling Rate | 104 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 1 |
| Output Voltage-Max | 2.35V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 87 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 85 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV320AIC14IDBTRG4 Overview
It is supplied in the 30-TFSOP (0.173, 4.40mm Width) package for the purpose of space saving. Tape & Reel (TR) packaging method is used. As a type of Voice-Band, this electronic part is able to deliver high-efficient performance in various applications. As far as mounting types are concerned, it uses Surface Mount. When the operating performance is set to -40°C~85°C, the system can operate normally. It consists of 1 / 1 ADCs/ DACs. The analog circuit is powered by 2.7V~3.6V. Supply voltage is set to 1.65V~1.95V for the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 30 terminations. In terms of electronics, it is a 30-pin device. The board is configured with 30 pins. The base part number TLV320AIC14 can be used to find related parts. Surface Mount technology is used for mounting it to a PCB. It is recommended to maintain the maximum supply voltage at 3.6V. Converting analog signals to digital signals requires 1 A/D converters. There is subcategory Codecs for this electronic part. 1.1V should be the minimum value of supply voltage. A voltage of 1.8V is required to operate the device. There are 2 channels for transmitting data on it. It is not recommended that the analog input voltage exceeds 2V.
TLV320AIC14IDBTRG4 Features
Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters
TLV320AIC14IDBTRG4 Applications
There are a lot of Texas Instruments TLV320AIC14IDBTRG4 CODECs Interface ICs applications.
- Metal forming & fabrication
- Multiplication
- Oil & gas production
- Robotics
- Position measurement
- RF-based home automation system
- Image denoising
- Demultiplexing
- Medical & Lab Equipment
- Counting applications
