TLV320AIC15CDBTR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 30 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| Type | Voice-Band |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLV320AIC15 |
| Output | VOLTAGE |
| Pin Count | 30 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Interface | I2C, Serial |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Mode | SYNCHRONOUS |
| Data Interface | Serial |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Number of A/D Converters | 1 |
| Output Voltage-Max | 2.35V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 1 / 1 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 85 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
TLV320AIC15CDBTR Overview
As a space saver, it comes in the 30-TFSOP (0.173, 4.40mm Width) package. We have adopted the packaging method of Tape & Reel (TR). In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Voice-Band. This device employs the mounting type Surface Mount. A performance setting of 0°C~70°C allows it to operate normally. It consists of 1 / 1 ADCs/ DACs. The analog circuit receives 2.7V~3.6V as a supply voltage. The digital circuit is provided with the supply voltage of 1.65V~1.95V. Signals are prevented from reflecting off the transmission line's terminations by using 30 terminations. The device has 30 pins. There are 30 pins on it. More related parts can be found using its base part number TLV320AIC15. Surface Mount technology is used for mounting it to a PCB. In order for the supply voltage to be maintained at 1.95V, it should be set to its maximum value. Analog signals are converted into digital signals by A/D converters. Subcategory Codecs applies to this electronic part. At a minimum, the voltage should be kept at 1.65V. There is no supply voltage for it. Transmission of data takes place over 2 channels. It is not recommended that the analog input voltage exceeds 2V.
TLV320AIC15CDBTR Features
Embedded in the 30-TFSOP (0.173, 4.40mm Width) package
Operating temperature of 0°C~70°C
1 / 1 ADCs / DACs
1 A/D converters
TLV320AIC15CDBTR Applications
There are a lot of Texas Instruments TLV320AIC15CDBTR CODECs Interface ICs applications.
- Textiles
- Multi-axis control
- Stagecraft
- Robotic arm positioning
- Missing value imputation
- Motor feedback
- Sawmills
- Magnetic positional control
- Pulp & paper mills
- Medical & Lab Equipment
