Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TQFP |
Number of Pins |
48 |
Weight |
137.410139mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
48 |
Type |
Voice-Band |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Codecs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Base Part Number |
TLV320AIC20 |
Output |
VOLTAGE |
Pin Count |
48 |
Power Supplies |
1.83.3V |
Number of Channels |
2 |
Interface |
2-Wire, I2C, Serial |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.1V |
Number of Bits |
16 |
Data Interface |
Serial |
Sampling Rate |
26 ksps |
Voltage - Supply, Analog |
2.7V~3.6V |
Voltage - Supply, Digital |
1.65V~1.95V |
Analog Input Voltage-Max |
2V |
Signal to Noise Ratio (SNR) |
84 dB |
Number of D/A Converters |
2 |
Resolution (Bits) |
16 b |
Sigma Delta |
Yes |
Number of ADCs / DACs |
2 / 2 |
Filter |
YES |
Dynamic Range, ADCs / DACs (db) Typ |
87 / 92 |
Output Code |
TWOS COMPLEMENT |
S/N Ratio, ADCs / DACs (db) Typ |
84 / 92 |
Input Code |
TWOS COMPLEMENT |
Height |
1.2mm |
Length |
7mm |
Width |
7mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV320AIC20IPFB Overview
For space-saving purposes, it is packaged in 48-TQFP. It is adopted to package in the Tray way. This electronic component is of the type Voice-Band, allowing it to provide high-efficiency performance in various applications. As far as mounting types are concerned, it uses Surface Mount. A -40°C~85°C operating performance setting allows it to operate normally. It consists of 2 / 2 ADCs/ DACs. There is a voltage supply of 2.7V~3.6V to the analog circuit. A 1.65V~1.95V supply voltage is applied to the digital circuit. Signals are prevented from reflecting off the transmission line's terminations by using 48 terminations. In terms of electronics, it is a 48-pin device. There are 48 pins on this board. Find more related parts by using its base part number TLV320AIC20. Based on the Surface Mount technology, the module is mounted to a PCB. The maximum value of supply voltage should be maintained at 3.6V. There is a subcategory of Codecs for this electronic part. Supply voltage should be maintained at 1.1V. A voltage of 1.8V is required to operate the device. The power supply is set to 1.83.3V. Often in the process of converting digital signals into analog signals, there are 2 D/A converters. There are 2 channels for transmitting data on it. A total of 16 bits are provided for storing information. It should not be possible to exceed 2V for the analog input voltage.
TLV320AIC20IPFB Features
Embedded in the 48-TQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
TLV320AIC20IPFB Applications
There are a lot of Texas Instruments TLV320AIC20IPFB CODECs Interface ICs applications.
- Detecting interrupts in microprocesstor applications
- RF-based home automation system
- Dynamic applications
- Material handling
- X-Y positioning
- Spooling or level wind
- Microprocessor
- CT and MRI scanning machinery
- Full adders
- Image denoising