TLV320AIC21IPFB
| Parameters | |
|---|---|
| Interface | 2-Wire, I2C, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Number of Bits | 16 |
| Data Interface | Serial |
| Sampling Rate | 26 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 1.65V~1.95V |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 84 dB |
| Number of D/A Converters | 2 |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 87 / 92 |
| Output Code | TWOS COMPLEMENT |
| S/N Ratio, ADCs / DACs (db) Typ | 84 / 92 |
| Input Code | TWOS COMPLEMENT |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Type | Voice-Band |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV320AIC21 |
| Output | VOLTAGE |
| Pin Count | 48 |
| Power Supplies | 1.83.3V |
| Number of Channels | 2 |
TLV320AIC21IPFB Overview
Space-saving reasons have led to it being packaged in a 48-TQFP package. Tray is the packaging method used. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Voice-Band. As far as mounting types are concerned, it uses Surface Mount. When the operating performance is set to -40°C~85°C, the system can operate normally. Integrated ADCs / DACs are available in 2 / 2. Supply voltage is 2.7V~3.6V for the analog circuit. A 1.65V~1.95V supply voltage is applied to the digital circuit. 48 terminations prevent signals from reflecting off transmission lines. There are 48 pins on this device. There are 48 pins configured on this board. Its base part number TLV320AIC21 can be used to find more parts like it. Mounted on a PCB based on the technology of Surface Mount. Supply voltage should never exceed 3.6V. There is a subcategory of Codecs for this electronic part. 1.1V should be the minimum value of supply voltage. In order to operate, it must be supplied with a voltage of 1.8V. A 1.83.3V power supply is needed to operate it. Digital signals are converted into analog signals with 2 D/A converters. The data transmission channel count is 2. There are 16 bits provided to store information. It should not be possible to exceed 2V for the analog input voltage.
TLV320AIC21IPFB Features
Embedded in the 48-TQFP package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
TLV320AIC21IPFB Applications
There are a lot of Texas Instruments TLV320AIC21IPFB CODECs Interface ICs applications.
- Dimensionality reduction
- Elevators
- Linear distance measurement
- Multi-axis control
- Subtraction
- Ball screw positioning
- Microprocessor
- Robotics vehicle with the metal detector
- Flight simulators
- Data transfer
